Introduction:
XPS Sandwich Panels are one of the most popular foam sandwich composite panels. It is a typical representative material combining strength and lightweight. Its core material is closed-cell extruded polystyrene foam, and its skin material has a variety of options (fiberglass, aluminum, wood, steel, etc.).
XPS Sandwich Panels for Trade and Project Supply
This XPS sandwich panel page is for B2B buyers comparing lightweight composite panels for repeat supply, fabrication, distribution, or project assembly. It is not positioned as a small retail board listing; the useful buying questions are facing material, panel thickness, surface finish, moisture exposure, and how the panel will be used in a commercial or project build-up.
For North American, European, and other export buyers, Banarta should be evaluated as a supplier/manufacturer contact: confirm the required skin material, intended application, packaging and order discussion instead of treating the page like a consumer home-improvement SKU.
XPS Sandwich Panel Selection for Lightweight Wall and Composite Assemblies
This XPS sandwich panel page is for buyers comparing lightweight composite panels for partition walls, wall lining, truck body panels, cold-room related structures, bathroom wall panels and other insulated panel assemblies. The product combines an XPS foam core with different facing materials, so the main selection point is the project environment and the required surface finish.
Banarta does not recommend choosing an XPS core sandwich panel by material name alone. Buyers should confirm the facing material, panel thickness, edge/detail requirement, moisture exposure and installation method before purchasing. The existing specification table on this page remains the source for published size and material options.
How to Choose the Facing Material
Facing Option | Typical Buyer Fit | Selection Note |
|---|---|---|
PVC skin | Interior wall lining, partition and decorative applications. | Consider when a smooth, easy-to-clean surface is required. |
Aluminum skin | Lightweight assemblies where a metallic surface is preferred. | Useful when buyers need a rigid panel face and a clean industrial look. |
FRP skin | Truck body, moisture-prone or impact-aware panel applications. | Often selected when buyers compare durability, moisture exposure and panel handling. |
SPC / HPL / plywood / ACP options | Project-specific wall, furniture, decorative or composite panel uses. | Choose based on surface finish, installation environment and fabrication method. |
Buyer Questions Before Ordering
- Which facing material matches the use environment: PVC, aluminum, FRP, SPC, HPL, plywood or ACP?
- Will the panel be used for partition walls, truck body, cold room, bathroom wall panel or another composite assembly?
- Does the project require cutting, bonding, edge treatment or a specific installation method?
- Should the order be matched to a standard option or discussed as a customized panel requirement?
Related category: XPS Core Sandwich Panels. Related product: Aluminum Faced XPS Foam Panel.
Specification:
Features | Specifications |
Length | 1200mm-4000mm or Customized |
Width | 600mm /1200mm |
Thickness | 15mm/20mm/30mm/40mm Or Customized |
Compressive Strength of XPS | 150KPa-1000Kpa Customized |
Dimensional stability70℃±2℃,48h | 1-2% |
Color of XPS Foam Board | Yellow/Blue/White/Pink |
Facing Materials | HPL / PVC / FRP / ACP/ SPC/ Plywood / Aluminum Sheets…. |
Typical Application of XPS Sandwich Panels
- Truck Body
- Partition wall
Because XPS is lightweight ,high pressure resistance, heat insulation, and sound insulation etc . Many people used it as a partition wall after laminating withsome facing materials. Nowdays, the common face materials are aluminum sheet, HPL, FRP, SPC, ACP, PVC etc.
- Cold Room /Clean Room / Bath Room
XPS foam has good and stable thermal conductive. And it is also low water absorption and high compressive strength etc. Therefore, it gets very great advantages in cold rooms building. It is extremely durable and can bear heavy loads. Meanwhile, it has high resistant to moisture and low thermal conductivie. More importantly , it can withstand the stresses of temperature changes and freeze and thaw cycles.
- More and more applications are being developed
XPS foam has very good thermal resistance , and it is with high compressive strength. Therefore, in oder to get perfect material for application , many people combine it with various decorative materials. And this kind application is increasingly in various fields, such as wall decoration insulation,roof insulation decoration, even furniture and other industries.
Hot Sales Product Remended
XPS Sandwich Panel Buyer Routing
For xps sandwich panel and xps foam sandwich panels sourcing, use this main Banarta product page when the project needs an XPS foam core with PVC, ACP, SPC, FRP or aluminum skin options. This page is the primary commercial landing page for buyer comparison and inquiry routing.
- For related XPS core options, review the XPS Core Sandwich Panels category.
- For project specification logic, read the XPS Sandwich Panel Specification Guide.
- For joint and sealing planning, read How XPS Sandwich Panel Joints Work.
PVC/UPVC Skin Variant Route
Use this page as the main XPS sandwich panel hub. When the buyer specifically asks for PVC sandwich panel, UPVC sandwich panel or XPS PVC sandwich panel, route the variant inquiry to PVC/UPVC Faced XPS Foam so the main hub does not absorb skin-specific search intent.
XPS Sandwich Panel Supplier for Project Applications
Banarta supplies XPS sandwich panels for buyers who need lightweight composite panels with PVC, FRP, aluminum, ACP, SPC or other surface skins. Typical applications include wall panels, cold-room and insulation systems, partitions, vehicle or door panels and other projects requiring a rigid foam core with a finished surface layer.
Common B2B selection factors
- Skin material: PVC/UPVC, FRP, aluminum, ACP, SPC or project-specific facing.
- Core requirement: XPS foam core for lightweight structure, thermal support and easy handling.
- Application: wall, door, partition, cold-room, interior panel or custom composite use.
- Project sourcing: confirm thickness, size, facing, edge treatment, packing and order quantity.
For distributors and project buyers
This product page is intended for B2B sourcing, not generic material browsing. If you are comparing XPS sandwich panel suppliers or need PVC/FRP/aluminum faced XPS panel options, send the application and target specification for selection support.
