Introduction
EPS Floorheating Panel, it is a integrated panel with 2 layers. On the surface layer, it is plastic film which is strong enough to support the pipe routing . And the down layer is EPS insulation foam which could provide good thermal resistance to the UFH system.
Its special mushroom design ensures quick and simple system to install. The main benefit of the system is the ready made pipe spacing and pipe retaining fixings. It provides ready-made pipe securing and spacing.. Meanwhile, you can use it with traditional and liquid screeds. It is suitable for all pipework layouts.
Specifications:
| Description | BWE-20 | BWE-20A |
| Thermal Conductivity at 10℃ | 0.029W/(m.k) | 0.031W/(m.k) |
| Heat Resistance | 0.8(m2.k)W | 0.8(m2.k)W |
| Compressive Strength | About 250KPA | About 250KPA |
| Applied Pipe Diameter | φ20mm | φ10mm |
| Total Thickness | 43mm | 33mm |
| Size(L*W)in mm | 1350mm*820mm | 1350mm*820mm |
| Thickness of Insulation Layer | 20mm | 10mm |
| Weight/M2 | 1250g | 1150g |
| Standard Package | 11.07M2 | 13.28M2 |
Advantages :
1. Saving the pipeline laying time 50% at most.
2. Improve the working efficiency，only one labor can finish the work.
3. Strong enough for people standing on .
4. Embedded pipeline design, protect the pipeline from damage
5. No need staples during installation, avoid damage of the insulation layer.
6. Uniform pipeline laying, keep the same distance between pipes.
EPS Floorheating Panel is a kind of floor heat distribution panel in hydronic underfloor heating system. It is cost-effectively and bring a lot of conviences . We have many different models available, welcome to contact us for more details.
How to install EPS underfloor heating panel
Hot Sales Products Recomended:
XPS Radiant Floorheating Board Aluminum XPS Radiant Panel XPS Foam Composite Panels
