Introduction:
Grooved XPS Foam Board, faced with High heating transfer Aluminum Sheet, it is widely used as underfloor Heating panel in the water floor heating system.
As everyone knows, XPS Foam Board is a cell-closed rigid foam board with high compressive strength and very good thermal conductive, meanwhile, its water absorption is lower than 1.5%, also mildew and moisture proof . It has already been as a good option for Underfloor Heating Panel processing.
On the surface of underfloor heating panel, we can customize the pipe path and pipe size according to your requirements, it will make your installation much more easlier.
This underfloor heating panel is an alternative to a screed type system when using water under floor heating systems. Wooden flooring or tiles can be laid directly on top without ground leveling again.
Specification:
Features | Specifications |
Panel Dimension | 1200mm*600mm (Or custom-made according to client’s requirements) |
Thickness | 25mm-50mm available |
Aluminum Thickness | Customized according to request if needed |
Applied Pipe Diameter | Φ16mm (or custom-made size.10mm and 20mm are acceptable) |
Thermal conductive | About 0.028 W / M.K |
Based board (XPS) Color | Blue / Yellow / White |
Compressive Strength | ≥300kpa |
Fire Rating | B1,B2,B3 |
Working Temperature | -30℃-80℃ |
Advantages of Aluminum Faced Grooved XPS Foam Inuslation Board:
1. Saving the pipeline laying time 50% at most.
2. Improve the working efficiency，only one labor can finish the work.
3. Strong enough for people standing on .
4. Embedded pipeline design, protect the pipeline from damage
5. No need staples during installation, avoid damage of the insulation layer.
6. Uniform pipeline laying, keep the same distance between pipes.
More Details from video, pls click>>
https://youtu.be/pCVWqqImu2s
Hot Sales Products Remended:
High Density Modular EPS Panel For Radiant Floorheating Apply to φ16mm Pipe
Underfloor Heating Panel Selection for Contractors and Project Buyers
This XPS underfloor heating panel is intended for buyers comparing insulation boards and grooved panel systems for radiant floor heating projects. The practical selection points are the heating pipe layout, floor build-up, insulation requirement, installation speed and compatibility with the project method.
Before ordering, contractors and distributors should confirm the required panel format, pipe route, floor finish, installation area and project quantity. The existing specification information on this page remains the source for published product details; this guide only explains how buyers can choose the right panel type for the application.
Common Buyer Checks
- Confirm whether the project uses hydronic floor heating, electric heating support layers or another floor build-up.
- Check whether grooved panels, flat insulation boards or foil-faced panels are more suitable for the installation method.
- Match the product choice to bathroom, residential, commercial or renovation use cases without relying only on the product name.
- For bulk or distributor orders, provide drawings, pipe layout requirements or project photos before final selection.
Related category: XPS Radiant Floorheating Panels. Related accessory: Aluminum Foil Tape for Underfloor Heating.
Underfloor Heating Buyer Route
Use this page for XPS underfloor heating panel inquiries where the buyer is comparing radiant floor heating boards, grooved XPS support and UFH insulation routes. This support block is for buyer routing only and does not add new performance claims or hidden specifications.
- For the main XPS underfloor heating panel route, use XPS Underfloor Heating Panel.
- For EPS-specific underfloor heating panel inquiries, use EPS Underfloor Heating Panel.
- For radiant heat panel wording and grooved XPS buyer intent, compare XPS Radiant Heat Panels and the XPS Radiant Floorheating Panels category.
